Reduce Energy Consumption

Awaken LED tubes reduce energy consumption by at least 60% as they draw only 17.5w. No ballasts are used, further increasing savings as ballasts on their own can draw 25w.

Long Lifetime

Each tube will last 60,000 hours before using up 30% of its lumens (light output), and 116,000 hours before loosing 50%. Fluorescents can loose 50% of their lumens within twelve  months.

NO MORE LAMP CHANGES OR EXPENSIVE RECYCLING

The true cost of every lamp is the cost of replacement bulbs, the labor expense and time needed to replace them. In addition, there will no longer be any ‘old’ lamps to recycle.  

Easy To Install

Installation is quick and easy. Simply remove the fixture’s ballast and reattach the wires to complete the circuit. Each tube fits directly into existing T8 and T12 fixtures.

Reduce HVAC Costs

LED lamps do not emit heat, and run cool to the touch. This eliminates the air conditioning typically used to cool down rooms heated up by traditional lighting.

 
If the light is wrong, the color will be too. Awaken LED lighting will significantly reduce energy costs and enable auto-body shops to complete their work faster and better, with brighter, more color accurate lighting.

If the light is wrong, the color will be too. Awaken LED lighting will significantly reduce energy costs and enable auto-body shops to complete their work faster and better, with brighter, more color accurate lighting.

Let your body shop ‘see’ colors and details

Awaken LED tubes offer a cleaner, crisper, higher contrast, color-accurate light. Reds are redder, blues are bluer, and subtle hints in the paint type, from gloss to pearlescent are more easily definable. Each LED tube offers an even color and light distribution with a beam angle of 120º.

Fluorescents fail at different times, resulting in uneven replacements and loose 50% of their initial lumens in the first year; creating a booth with different color temperatures and hot spots

The eye sees LED light as brighter

Light meters only measure Photopic (yellow spectrum) light, while LEDs emit both Photopic and Scotopic (blue spectrum) light, making Awaken LED tubes appear brighter than measured.

High color accuracy

Standard fluorescent tubes only show 70% of the light spectrum, and fail to match natural sunlight, while Awaken 95 CRI LED lamps reveal 95%.

This graph compares the percentage of  accuracy, by color, of a 80 CRI and Awaken 95 CRI lamp.

Always Compare Effective Lumens

Awaken LED tubes provide the same EffectiveLumens as a fluorescent tube. Effective Lumensare based on each tube's Initial  Lumen Output, Photopic / Scotopic Factor,  Downward LightRatio and Light Loss Factor.

Wider Spectrum With 95 CRI

Vehicles are often brought outside to verify the body work and paint because there is a 20-30% difference between the colour spectrum inside the booth and under sunlight. Awaken LED tubes bring that down to a 5% difference.

Even Light Distribution

Unlike less expensive LED tubes with only a single row of larger LEDs, Awaken uses two rows of 144 LEDs to ensure even light distribution without any hotspots.

10 Year warranty

Five year warranty against color shift and lumen degradation, and 10 years protection against failure.

Significantly reduce the need for do-overs, the cost of work, and materials. Replacing fluorescent tubes with Awaken LED lighting provides a brighter, higher contrast, more color accurate environment for easy viewing of details. This helps to achieve better color matches, less re-mixing, better estimations and more satisfied customers.

Significantly reduce the need for do-overs, the cost of work, and materials. Replacing fluorescent tubes with Awaken LED lighting provides a brighter, higher contrast, more color accurate environment for easy viewing of details. This helps to achieve better color matches, less re-mixing, better estimations and more satisfied customers.

Improved Work Environment

Unlike fluorescent lamps, Awaken LED lamps do not flicker, buzz, or strobe; meaning there will be no headaches, nausea, or eyestrain caused by the lighting. LEDs emit no UV light; meaning paints won’t cure prematurely.

UL Certified retrofit kit

Awaken LED linear tubes are supplied with UL Certified retrofit kits. This means that you won’t have to re-certify your fixtures after adding our tubes. Your current fixtures will maintain their UL certification.

 

Industry Leading Testing

Although Designlights Consortium (DLC) has strict requirements, there many “above and beyond” requirements missing that Awaken LED tubes also offer regarding the reliability of the tube and driver, and the MTBF (mean time between failures).

Every Awaken LED lamp is aged 48 to 72 hours to ensure extra long life. In addition, each LED lamp has met rigorous third party testing at Department of Energy approved labs for the following tests which are not required by DLC:

 

• Operational/Transient Voltage
• Mechanical Shock
• Rapid Temperature Change
• Cold Start and operating test• Damp Heat
• Dry Heat Operating
• Accelerated Life (30 days)
• IP6X Dust Test
• Vibration Test
• EMC Report; FCC Part 15