About the Lxr Linear Tubes
Components designed for 24/7 operation.
For use with direct line voltage, without a ballast.
Choose Powered Both Sides to eliminate tombstone rewiring when ballast is removed; with UL certified Current Leakage Protection that eliminates the risk of electric shock during installation.
Powered One Side also available.
2kV surge protection and complete dirty power noise protection.
Reliable 24/7 Operation
Every component has been designed for 24/7 operation, including a non isolated internal driver which has been specially developed to give this lamp maximum reliability and some unique abilities including complete dirty power noise protection, and 2kV surge protection.
Protection From Electric Shock
The driver senses when only one end is attached to power, and doesn’t send power to the opposing end until it is connected to power. This prevents socket to lamp pin electrical arcing so the tube is AC Line voltage friendly (works with direct input voltage 100V to 277V).
Choose Powered One Side or Both Sides
Choose Powered Both Sides to eliminate tombstone rewiring when the ballast is removed, or Powered One Side, for easy installation into any shunted or unshunted fixture.
50% Longer Lifetime Than Other LED Tubes
Unlike typical LED tubes with a 50,000 hour ‘L70’ lifetime. Awaken LED tubes have a L70 of 75,000 hours. This extends their lifetime a further five years beyond other LED tubes, based on 15 hours of use daily, providing additional savings and cash flow benefits.
Save 20% More EVERY YEAR Compared To Other Tubes
Our 160 lm/w tubes use 20% less energy than others. Our 10w, 160 lm/w LED tube emits 1600lm. Others only offer 130 lm/w, and require 12w to emit 1,560lm. At 18 hrs./day and $0.10/kWh, for every 100 tubes, Awaken will increase energy savings by $130.
Additional Savings Without The Ballast
Additional savings accrue from never having to replace or remove the ballast after installation. Additional savings also accrue from never having to replace or remove the ballast after installation.
Dimming Available For Daylight Harvesting
Optional 0-10v dimming is available to reduce light levels and power consumption when ample ambient lighting is available from either windows or skylights. Dimming a 10w tube by 25% for four hours every day would significantly increase savings by $3.50 every year, and extend the lifetime, at 15 hrs. daily use and $0.10/kWh.
Low Profile End Cap
A low profile end cap gives the tube a slimmer, and sleeker appearance which makes replacements quicker and easier due to the reduced bulk around the pins.