About the Lxd Hybrid Tubes
A direct replacement lamp, requiring no re-wiring of the light fixture.
Can also be used without the ballast.
Compatible with electronic and magnetic ballasts.
Smooth, ‘natural’, even light distribution.
Frequent on/off switching does not affect lifetime – instant ON operation.
Eliminate Up To 100% Of The Ballast Wattage
Awaken’s unique Ballast Factor Offset reduces the ballast’s power consumption up to 100%. Other tubes consume at least 3w per tube from the ballast. This translates to $1.65 additional savings per tube, every year (at $0.10/kWh, 15 hrs./day).
No Rewiring Required When Ballast Removed
Choose Powered One Side or Both Sides to eliminate tombstone rewiring when the ballast is removed; for shunted and unshunted fixtures. When one end is attached to power, power isn’t sent to the other end until it is inserted. This eliminates the risk of electric shock.
Reliable 24/7 Operation
Though all components have been designed for 24/7 operation, a non isolated internal driver has been specially developed to give this lamp maximum reliability and some unique abilities including complete dirty power noise protection, and 2kV surge protection.
50% Longer Lifetime Than Other LED Tubes
Unlike typical LED tubes with a 50,000 hour ‘L70’ lifetime. Awaken LED tubes have a L70 of 75,000 hours. This extends their lifetime a further five years beyond other LED tubes, based on 15 hours of use daily, providing additional savings and cash flow benefits.
Save 20% More EVERY YEAR Compared To Other Tubes
Our 160 lm/w tubes use 20% less energy than others. Our 10w, 160 lm/w LED tube emits 1600lm. Others only offer 130 lm/w, and require 12w to emit 1,560lm. At 18 hrs./day and $0.10/kWh, for every 100 tubes, Awaken will increase energy savings by $130.
Dimming Available For Daylight Harvesting
Optional 0-10v dimming is available to reduce light levels and power consumption when ample ambient lighting is available from either windows or skylights. Dimming a 10w tube by 25% for four hours every day would significantly increase savings by $3.50 every year, and extend the lifetime, at 15 hrs. daily use and $0.10/kWh.
Low Profile End Cap
A low profile end cap gives the tube a slimmer, and sleeker appearance which makes replacements quicker and easier due to the reduced bulk around the pins.